Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Didn't know that the biggest place I go is a field little bigger then a football field. So.i should be good aswell. I like seeing the battery voltage on the display. (Battery voltage for nitro truck hump pack). Very handy. Wonder if it will display esc voltage aswell? I have not tried it in my kronos yetSeems like my situation. It’ll be a month or so before I get a chance to use mine as well. There’s still a few parts I need to get while I have the Skeeter apart.
I watched a few videos on the smaller receiver and it went a tad past 200 yards which is more than enough for my needs.
I want that . Looks sweetMail call.
Radio parts.
- Yeah Racing NB4 Aluminum Protector: YA-0711BK
View attachment 3632
View attachment 3633
Price wise they're not that bad. This is one of the only places I found them in stock that took PayPal. Straight from Hong Kong. And to be honest, the shipping time wasn't terrible.I want that . Looks sweet
That's a good deal: I expected it to cost more. I might have to purchase one myself.Price wise they're not that bad. This is one of the only places I found them in stock that took PayPal. Straight from Hong Kong. And to be honest, the shipping time wasn't terrible.
https://www.rcmart.com/yeah-racing-aluminum-protector-frame-for-flysky-nb4-pro-ya-0711bk-00120577
Yea, you shouldn’t have a problem with them. As of how long it took to arrive I can’t be precise. I’d say under two weeks though. I guess with anything crossing the border, customs has their role to play.That's a good deal: I expected it to cost more. I might have to purchase one myself.
I placed an order with RC Mart for Yokomo steering knuckles for my drift car. All the stateside US shops were out of stock, and RC Mart was the only place I could find them. Hopefully the parts will arrive this coming week.
NiceMail call.
Corally Parts.
- Extreme Basher Battery Straps 250 X 20mm: C-50530
- Extreme Basher Battery Straps 300 x 20mm: C-50535
- 7075 Chassis Brace Holder, Front: C-00180-827
- 7075 Chassis Brace Holder, Rear: C-00180-828
Tools.
- TLR Turnbuckle Wrench: TLR99102
View attachment 3662
View attachment 3663
I like that turnbuckle wrench. I'm to cheap to buy one though. LolMail call.
Corally Parts.
- Extreme Basher Battery Straps 250 X 20mm: C-50530
- Extreme Basher Battery Straps 300 x 20mm: C-50535
- 7075 Chassis Brace Holder, Front: C-00180-827
- 7075 Chassis Brace Holder, Rear: C-00180-828
Tools.
- TLR Turnbuckle Wrench: TLR99102
View attachment 3662
View attachment 3663
I bought a wrench too a few years back. It's not the same as yours, but they surprisingly make life easier then fumbling around with other tools.It wasn’t bad if I recall. I got it from Amazon.
Update: Installed the correct 15T pinion from Corally, swapped out the center diff again with their 7075 unit and designated pins, reprogrammed ESC using hobby wing card and it now functions & sounds as it should. I’m just waiting on my 2nd order from Eric van so I can put it all together. Oh.. also waiting on POS big bumper to arrive. Then I can hopefully enjoy it.I’ve been reading a bit on the do and don’t when it comes to battery charging, storing etc. while waiting on more parts to arrive. Lots of good info here in the forum. Looking at a Bat-Safe box now.
Been anxious to tinker so last night I updated the NB4 and bound the receiver to test for function. I knew something wasn’t quite right a while back when I installed the Robinson 15T pinion and set mesh but was really unsure as to what because I’m new to this. Well after verifying throttle it sounded horrible (screaming) and noticed a tad bit of wear on the gear and metal dust in the center chassis area. Took it apart and reset mesh then gave it a go and still extremely loud and not right. So…. Me being me I went full sent on the throttle to see what would give. Lo and behold sparks and metal went just a flyin! Afterwards, I took the center diff and pinion housing off and thus is the results.
View attachment 3637
After cleaning up all the mess and reading a bit, I found it was the wrong mod pinion. Who knew? Another thing I noticed was a bit of forward and aft movement form the center diff in its home between the mounts. I figured it was normal but ordered diff shims anyway only to find out they normally only apply to the front and rear diffs. So after reading some more I came across this thread from @BashingBrian https://www.corallyforum.com/threads/corally-center-diff-differences.220/
And decided to go ahead and buy Corallys 7075 Diff and pins as well as their correct 15T pinion.
With that being said… There is absolutely nothing wrong with the 7075 Diff housing I purchased from Eric van, I just noticed that Corally offered and recommended different pins for their housing and while I was ordering a pinion I figured I’d save on shipping and purchased all three. Shipping’s not cheap buying directly from Corally.
And that’s where I’m at now. Decided I give an update while sitting here waiting on batteries to hit the storage range.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Corally RC community for RC enthusiasts that covers all aspects of the Corally-RC brand!
Register Today It's free! This box will disappear once registered!