BashTillBroken
Well-known member
- Messages
- 67
- Reaction score
- 45
It’s only 4s until you get a covid relief check
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Fedex is the worst around Portland Oregon. My deliveries seem to go into a blackhole (also known as the Troutdale Distribution Center). Lol.yayyyyyy, delayed from… you guessed it FEDEX
Says”Wednesday” even though it’s been in the distribution center since Sunday evening.
Poor guy. He left for work and guess what showed up lol. Now he has to work all night just wishing he was home opening that box lolFedex is the worst around Portland Oregon. My deliveries seem to go into a blackhole (also known as the Troutdale Distribution Center). Lol.
Yep! Oregon is right below me and my stuff gets stuck in troutdale all the time!Fedex is the worst around Portland Oregon. My deliveries seem to go into a blackhole (also known as the Troutdale Distribution Center). Lol.
Man...they deliver early where you are.Video coming soon! View attachment 346It came today… haha
Only thing worse than FedEx? USPSyayyyyyy, delayed from… you guessed it FEDEX
Says”Wednesday” even though it’s been in the distribution center since Sunday evening.
Looking forward to your build You always use the good stuff! I'm jellyWell, I have it all ordered up. It’s on its way!!
I’m so excited about about this car. This 4s is like a minor 6s rig. Looking forward to the build!
View attachment 13
Tonight… probably another 8 hours or so.. once I get home I think..Eagerly awaiting the video, I'm living vicariously through you right now!!!
I know what's inside.
Yeah buddy!Ok, so I got the Sketer yesterday!
Now for the bad news about the whole experience…. I had to break out the hammer and put the thing on it’s side and literally punch the hex through the wheel. All 4 tires … it took me like 20 minutes to get all 4 off. The bore is too small on the wheel and they literally got pressed on when they over torqued the wheel nuts. My theory is they torque them so much so the nuts don’t fall off. They have no grip grooves on them like all the other manufacturers do for some reason.
Haven’t torn it down and checked diffs or anything yet… will do that soon, maybe over the weekend…
I know i said a video… but it’ll have to wait haha.
Watch my channel!
https://youtube.com/channel/UCDuWrV9wG6BGFcc_lVB1q-Q
I'm gonna give them a shot. It's a pretty cheap mod.I think for replacement wheels the problem is going to be getting the correct offset and personally I don't really want to do wide hubs
You could literally remove them and run the car. Just window dressing!I'm surprised about the wheel nuts not being serrated, that's just asking for trouble.!! It was one of the first things I did on my XTR last year..
It's an easy fix though with the help of eBay or aliexpress
Part of the pleasure of owning a tank!I've had tight wheels before but what you experienced is a bit extreme, hope all is ok with the truck.!!
Nope, it really doesn't.The color, is it orange or reddish?? It's so hard to tell in pictures.. I can't help myself but the body is so ugly hope it looks better in the flesh.!!
I remembered seeing you post about it.. I was hoping it wasn’t that extreme but DAMN! I’ve never struggled with wheels for that long. I’ve had under bored backflip lp’s that we’re really difficult to take off.. but these were like 10x worse lolYeah buddy!
Welcome to Sketer ownership. I posted about this on the Arrma forum. I pulled mine apart laying it sideways on the floor. Once I yanked one side I replaced them with the backflips so I could yank the other side off.
I DRILLED THOSE MFR's OUT!!!
Just pulled them tonight for some bearing maintenance and cleaning and they had to be wiggled off. I think I'm gonna swap out mine with some old ones I have in the parts bin.
I'm gonna give them a shot. It's a pretty cheap mod.View attachment 434
You could literally remove them and run the car. Just window dressing!
Part of the pleasure of owning a tank!
Nope, it really doesn't.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Corally RC community for RC enthusiasts that covers all aspects of the Corally-RC brand!
Register Today It's free! This box will disappear once registered!