Shogun Thickness of the diff paper gasket

[Opua]

Guys, while taking apart the center differential, I noticed that the paper gasket is torn. Before I go ahead and buy a replacement—only to end up paying more in shipping costs than the part itself—could you tell me what its thickness should be? I’m planning to buy some gasket paper sheets to make my own, but I’m not sure about the correct thickness. If I get it wrong, I risk compromising the tolerances once the cover is bolted back on. I tried measuring it with a set of calipers and got 0.56 mm; I assume it’s meant to be 0.5 mm, but I’d appreciate your input to be sure. Also, would the gaskets for the front and rear differentials be the same thickness?

 

[Nelson.81]

Fireblade sells gasket kits front/rear gaskets plus orings

https://ebay.io/m/px7ynt

 

[Nelson.81]

I’ve set of his somewhere I’ll measure thickness of them when get a chance

 

[Opua]

I’ve set of his somewhere I’ll measure thickness of them when get a chance

Thanks, I have the differential open; if you could provide me with the measurement, I’d be really grateful—that way I can put everything back together