Asuga Sequence wire

[madasuga25]

Hello corally peoples,
I'm considering removing the sequence wire to run a single plug but not sure if I can keep external capacitors or is it removed and what has to be done with the 2 smaller negative and positive wires that feed into capacitors. Or is it best left alone. Thanks all

 

[Nelson.81]

yes you can run a single plug & keep the cap pack this vid should make sense of it all for you. Corally esc is rebranded Hobbywing.

 

[madasuga25]

yes you can run a single plug & keep the cap pack this vid should make sense of it all for you. Corally esc is rebranded Hobbywing.

Thanks Nelson.81

 

[CatEatingTroll]

The ESC and capacitors don't know if you're running two batteries, one battery and a jumper plug, or just one plug. If the capacitors are not directly connected to the plug then it's safe to cut the plugs off and solder a single plug on.

 

[madasuga25]

The ESC and capacitors don't know if you're running two batteries, one battery and a jumper plug, or just one plug. If the capacitors are not directly connected to the plug then it's safe to cut the plugs off and solder a single plug on.

Thanks mate, all done.