Kagama Fyi Kagama LE,2.5k au.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
mrBigpitts

mrBigpitts

Well-known member
Messages
120
Reaction score
161
Points
188
This is what 2.5k will get you in Australian dollars. Heaps of fun!
1000003460.webp
1000003463.webp
1000003464.webp
1000003466.webp
this is what 2.5k looks like in Australian dollars.
 
Nelson.81 said:
🤑 £1250 uk dam sh$t ain’t cheap in Australia . Is that a separate bec for the fans?
Click to expand...
Na mate,just running 8.4v off the max 8 esc,you're not wrong about the cost of things in Australia, my 12s Kraton with the m2c chassis and vitavon gear is into me for 5.6k.
All that cash and the biggest enjoyment I'm having at present is driving is my stock kagama 4 with 13mm hub extensions.

20260117_015512.webp
 
Whats the little circuit board on top the receiver box then thought it was a separate bec?
 
Nelson.81 said:
Whats the little circuit board on top the receiver box then thought it was a separate bec?it's a led controller pcb for the lights you can see fitted to the side of the car,I can switch them with a spare channel from my dumbo transmitter, im getting old and it helps me whenever I'm driving at the local park at night.
Click to expand...
 
Can get recievers with led control built in one I had was too big for corally reciever box couldn’t really close lid tight. But all wiring bugged me anyway so pulled it all out
 
Nelson.81 said:
Can get recievers with led control built in one I had was too big for corally reciever box couldn’t really close lid tight. But all wiring bugged me anyway so pulled it all out
Click to expand...
It was part of the 20 dollar light kit i purchased from Amazon, I routed the wiring as neat as I could seems to be holding up well,would have liked to put it in receiver box as well but no room.
 
mrBigpitts said:
It was part of the 20 dollar light kit i purchased from Amazon, I routed the wiring as neat as I could seems to be holding up well,would have liked to put it in receiver box as well but no room.
Click to expand...
I wish corally would redesign it I hate it lol I think it & servo mount could be better designed less screws, weight & less of a pain to feed wires into it. Gripe over have a good wkend 😂
 
Nelson.81 said:
I wish corally would redesign it I hate it lol I think it & servo mount could be better designed less screws, weight & less of a pain to feed wires into it. Gripe over have a good wkend 😂
Click to expand...
Yep,total pita, ive cut a notch in the side of all my corally receiver boxes so I don't have to remove them when I change servos
 
mrBigpitts said:
Na mate,just running 8.4v off the max 8 esc,you're not wrong about the cost of things in Australia, my 12s Kraton with the m2c chassis and vitavon gear is into me for 5.6k.
All that cash and the biggest enjoyment I'm having at present is driving is my stock kagama 4 with 13mm hub extensions.

View attachment 11565
Click to expand...
Lol so I've been hearing having a larger scale is more of a statement piece then anything. Mostly the reason I haven't added one...yet 😏. I was at the some what local (hour drive) hobby shop yesterday and the stack of TC vehicles looked so good I contemplated bringing the 7 or so rtr and rollers home hahaha but I'd be dead once I put the truck in park at home lol.
Whats your thoughts on the Kag4?
 
kag4 is great once you ditch the factory shock oils! Get a motor fan if you're gonna run 17T off-road, also worth upgrading the rear driveshafts to offset dogbones if it doesn't come with them.
 
Tommyguns89 said:
Lol so I've been hearing having a larger scale is more of a statement piece then anything. Mostly the reason I haven't added one...yet 😏. I was at the some what local (hour drive) hobby shop yesterday and the stack of TC vehicles looked so good I contemplated bringing the 7 or so rtr and rollers home hahaha but I'd be dead once I put the truck in park at home lol.
Whats your thoughts on the Kag4?
Click to expand...
Tough as nails and gives me a lot less grief than my kag 6 cars in regards to breaking things,my son always takes it and says he would have bought one rather than his kag 6 in hindsight.
I run a 15 pinion and dual motor fans with 13mm hub extensions "helps a lot with roll overs on sharp corners",honestly think it's one of TCs best cars.
The punisher body def looks better!
 
Last edited:
Back
Top