Asuga It's time

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
madasuga25

madasuga25

Well-known member
Messages
117
Reaction score
86
Points
183
Finally I'm getting a chance to build my crazy asuga xlr and have 3 questions: will the xc esc e6 fit and can it handle just cruising around at lower speeds or is it primarily for high speed runs? Thanks all
 
They fit & not just for speed running can bash with esc no issues

IMG_0489.webp
 
The E6 is just as big as a C6 and a Max6. G1.
I have those Max6's in my Asugas. They're a tight fit, but i got them in the original spot.
I have a XC C8 in a Shiroi and a C6 in a Fireteam. I like those XC ESC's. They are smooth and powerful.
That E6 should be fine.
No need to worry about that.
 
SirCrashALot said:
The E6 is just as big as a C6 and a Max6. G1.
I have those Max6's in my Asugas. They're a tight fit, but i got them in the original spot.
I have a XC C8 in a Shiroi and a C6 in a Fireteam. I like those XC ESC's. They are smooth and powerful.
That E6 should be fine.
No need to worry about that.
Click to expand...
Thanks man, can't wait to see it rip!
 
SirCrashALot said:
The E6 is just as big as a C6 and a Max6. G1.
I have those Max6's in my Asugas. They're a tight fit, but i got them in the original spot.
I have a XC C8 in a Shiroi and a C6 in a Fireteam. I like those XC ESC's. They are smooth and powerful.
That E6 should be fine.
No need to worry about that.
Click to expand...
Been using a XC C8 in a Hobao sste over the weekend loving this esc is it me or do these XCs have really good low speed control? Thing is crazy smooth and cracking value for money 😃.
 
Partydaz said:
Been using a XC C8 in a Hobao sste over the weekend loving this esc is it me or do these XCs have really good low speed control? Thing is crazy smooth and cracking value for money 😃.
Click to expand...
Yeah, I'm on the fence about the e6 200amp and the max6 g2 200amp. Some are saying fantastic esc and others saying the switches are an issue when landing hard, but I know if there's an issue it will be harder to rectify it with Amazon over going through a hobby store
 
Never had a problem with the XC C8 in my Mojave 4s as the switch was enclosed under all that body shell & interior. Did have the Hobao sste shut off mid blast must of been a rock flung up and hit the off button 😄 mild inconvenience as I was sitting atop an old brick building to get a good view of the track and grumbled getting down as the knees aint what they use be :ROFLMAO: , I have the switch facing back like in the Corallys but the switch feels so tiny compare to a hobbywing rubber push button.

Saying that a friend has a few XC escs in his rigs and I have seen him launch them time and time again with no problems 👍
 
I think it’s the same power switch tamiya was using back in the 80s on its rc both xc & castle need to up they’re game in that department, I’ve tried to put it somewhere outta harms way 🤞. If feeling brave you could change it
 
madasuga25 said:
Yeah, I'm on the fence about the e6 200amp and the max6 g2 200amp. Some are saying fantastic esc and others saying the switches are an issue when landing hard, but I know if there's an issue it will be harder to rectify it with Amazon over going through a hobby store
Click to expand...
I don't send my trucks like i want to destroy them.
Lots of cartwheels and barrel rolls, though.
I never had that problem so far.
 
Nelson.81 said:
Only belted tire that size just hate price of them, I’ve the method rc a bit smaller tire & cheaper but I don’t think they best suited for driving on grass which I do
Click to expand...
Dboots wheels are expensive. But they last for years, as long as you stay off road.
I have the 6s and 4s Mojave wheels.
I have been looking at belted Katars for the Fireteam as well.
 
Partydaz said:
Never had a problem with the XC C8 in my Mojave 4s as the switch was enclosed under all that body shell & interior. Did have the Hobao sste shut off mid blast must of been a rock flung up and hit the off button 😄 mild inconvenience as I was sitting atop an old brick building to get a good view of the track and grumbled getting down as the knees aint what they use be :ROFLMAO: , I have the switch facing back like in the Corallys but the switch feels so tiny compare to a hobbywing rubber push button.

Saying that a friend has a few XC escs in his rigs and I have seen him launch them time and time again with no problems 👍
Click to expand...
Thanks for info, they seem good
 
Nelson.81 said:
Only belted tire that size just hate price of them, I’ve the method rc a bit smaller tire & cheaper but I don’t think they best suited for driving on grass which I do
Click to expand...
I prefer grass as well, but I need a tyre that will do the occasional speed pass in car parks but also good on grass, looks like the 1650kv will destroy tyres quickly on toad
 
SirCrashALot said:
Dboots wheels are expensive. But they last for years, as long as you stay off road.
I have the 6s and 4s Mojave wheels.
I have been looking at belted Katars for the Fireteam as well.
Click to expand...
I've seen someone using badlands mx 38 but i don't want them that big
 
Back
Top