Sketer Wheelie????

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
D

driver2910

Member
Messages
12
Reaction score
7
Points
8
My sketer doesn’t seem to want to wheelie any ideas/Tips?

I’ve dropped the rear suspension, the front lifts but no wheelie running a 4s
Thanks
 
driver2910 said:
My sketer doesn’t seem to want to wheelie any ideas/Tips?

I’ve dropped the rear suspension, the front lifts but no wheelie running a 4s
Thanks
Click to expand...
Have you tried charging the battery? 🤔 It might be flat. 🤭


But seriously....it could be that something is binding. Or your motor might be cooked.

What gearing are you using? Maybe try dropping a tooth on the pinion. Increase the punch on your ESC.

How old is your battery?
 
I think it’s the standard 13t, I’ve ordered a program thing someone recommended to do the punch. Defo battery charged and not that old.. I’m new to this so I apologise in advance 🤣
 
driver2910 said:
I think it’s the standard 13t, I’ve ordered a program thing someone recommended to do the punch. Defo battery charged and not that old.. I’m new to this so I apologise in advance 🤣
Click to expand...
Nothing to apologise for! It was me that recommended the program card. 😝😅

So admittedly, I'm quite hurt that you didn't remember. Better call me a waaahmbulance.....🤣🤣😝
 
You could go thicker fluid in centre diff. You don’t need program card to change esc settings, easier with a program card but can do it manually also.

 
Screenshot_20230731_162117_edit_217635850132936.webp

On 6S, the rigs are constantly at risk of insanity level wheelies on stock gearing.

I think 4S is more sensible, but if you feel like something a bit more spicy - consider 6S.

My rig popped a wheelie at 50+ mph on 17/46 gearing.

I caught it with onboard video, too! 😁

Check it out here at 5:08:

 
I have the same "problem".
This is caused mainly, by the lag of tx/rx when i try to launch start.
And i did change diff fluid in center diff.
 
I’ve managed to turn punch to 5 it now lifts but doesn’t stay up. Adjust rear Suspension maybe?
 
Horatio said:
View attachment 7334
On 6S, the rigs are constantly at risk of insanity level wheelies on stock gearing.

I think 4S is more sensible, but if you feel like something a bit more spicy - consider 6S.

My rig popped a wheelie at 50+ mph on 17/46 gearing.

I caught it with onboard video, too! 😁

Check it out here at 5:08:

Click to expand...
Didn’t think you could run the skewer with 6s ??battery
 
Put a kuron 825 combo in there. I did that also. It rips and wheelies for days of you want to. I lowered the punch because of 2 much wheelies 🤔
 
Back
Top