Syncro Trying to decide between Syncro 4, Radix, or Spark xb6 for tracking use

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I have a syncro plus radix both 4s and I prefer the syncro, I've added a chassis brace to the syncro which is a must buy! But can't get one for the Radix. Dunno why folks are saying buy antiroll bars cos they come as standard on both?? I go bashing every Sunday with a group ~ look up "Sundon rc meet ups" on Facebook.
 
Bluecray said:
I have a syncro plus radix both 4s and I prefer the syncro, I've added a chassis brace to the syncro which is a must buy! But can't get one for the Radix. Dunno why folks are saying buy antiroll bars cos they come as standard on both?? I go bashing every Sunday with a group ~ look up "Sundon rc meet ups" on Facebook.
Click to expand...
 
Oh and I've added a python front bumper to both the Radix and syncro which gives far more protection at the front! (standard one is total crap)
 
Bluecray said:
I have a syncro plus radix both 4s and I prefer the syncro, I've added a chassis brace to the syncro which is a must buy! But can't get one for the Radix. Dunno why folks are saying buy antiroll bars cos they come as standard on both?? I go bashing every Sunday with a group ~ look up "Sundon rc meet ups" on Facebook.
Click to expand...
Syncro don’t come with anti roll bar. Radix,python & Syncro all share same front bumper too. I made the lwb chassis brace fit python/radix

IMG_6371.webp


IMG_6370.webp


IMG_8538.webp
 
Phantom0387 said:
Lovely build, what brand are those aluminum parts?
Click to expand...
Thanks, they’re scorched hubs for typhon It’s not yet complete rear hubs causing some problems but waiting on the postman deliver some parts hopefully get it finished off.

Nelson.81

Python Thread 'Is it a python, radix , spark or typhon'

What started out as a python over time I added the spring steel outdrives & most of the corally 7075 parts shock towers, chassis, diff mount ,servo saver, Ackerman, top deck, hinge pin holders. I then changed the bodyshell & fitted radix 4s body , tworks titanium centre driveshafts & adapted the lwb t2t brace to fit. Then onto its current refresh/makeover decided to add the spark arms , corally 7075 bulkheads & centre diff cover & tie the t2t brace into centre diff & add scorched hubs & titanium driveshafts. Waited until I was off work this wk yo tackle this but stripped the buggy down in...
  • Like
 
If you are looking for a more challenging drive, get a syncro 2wd. Performance wise (cornering) a a syncro or spark 4wd will be miles ahead.
 
Last edited:
Back
Top