Syncro Syncro4 More Punch and Power!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Jeo79

Jeo79

Well-known member
Messages
147
Reaction score
194
Points
223
Corally RC's
  1. Muraco
I've been loving my Team Corally Syncro 4! The driveability, punch and overall performance are brilliant, and I don't want to convert it to 6S. However, I'd love to squeeze a bit more power and speed out of it while staying on 4S.

I'm considering increasing the centre diff oil weight, going up to a 16T pinion and fitting a bigger ESC fan (I've already got one on the motor).

What would you recommend to get more poke out of the Syncro 4 without sacrificing reliability or moving to 6S? Anyone tried these upgrades?
1000088461.webp
 
Fixed motor mount so 17t is your next size up from 15t. You could swap the motor, that’s a 4168 2150kv. Hobbywing 4268 2500kv or brands probably do similar motors. Old vid but if I can find it chriswithac had that motor in a typhon on 4s was pretty lively.
 
If your current temps are OK with those bigger tires you run on grass, I’d also go for 17T. Not only because of the motor mount, but also because I doubt going up 1 tooth would be very noticeable. From 15 to 17 you should definitely notice.
 
If you have the same motor mount that comes on a Punisher 4 then your options are 14/16/18t if you want proper gear mesh. With the recommended gears you're pushing your truck with the tips of your gear teeth.

The bottle neck is your ESC and motor. I recommend a Hobbywing Max8/ 4278 motor, 2250kv.
My wheels are twice as big as yours and I'm running an 18t pinion. I do not have an overheating problem.

1000000390.webp
 
Cheers guys 8 didnt even realise there wasn't a 16t spot and as luck would have it I have a 17t so will try that. The MX28's ballooned too muchness will go back.to stock tyres

@Nelson.81 @Sandracer_NL
 
CatEatingTroll said:
If you have the same motor mount that comes on a Punisher 4 then your options are 14/16/18t if you want proper gear mesh. With the recommended gears you're pushing your truck with the tips of your gear teeth.

The bottle neck is your ESC and motor. I recommend a Hobbywing Max8/ 4278 motor, 2250kv.
My wheels are twice as big as yours and I'm running an 18t pinion. I do not have an overheating problem.

View attachment 13328
Click to expand...
Cheers.... ahh I was trying to see how far I can push the Syncro with stock electronics. I'll take up the gearing and probably thicken the centre diff fluid first and see if rhar gives enough performance.

Ironically the next RC on my wish list is the Punisher 4 as a winter basher. And that will be gettung a Max8 combo. Good to see The Punisher 4 can run such big wheels, I'm not a fan of the stock wheels for air
 
Hobbywing bl150 another cheaper alternative for esc do everything you need for a 4s rig. But here’s the vid of tlr typhon 2500kv he other vids on it not sure if he says what speeds it does but the Syncro an even lighter buggy so be even more lively in it.

 
Back
Top