Syncro RC10 B7 - Horatio
- Thread starter Horatio
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Horatio
Well-known member
- Messages
- 2,668
- Reaction score
- 3,540
- Points
- 458
- Thread starter
- #43
I'm happy to report a 3rd place overall championship position with my Vision Racing B7. It has performed flawlessly.
At the last race of the series, I am proud to say I was the highest placed B7 driver, beating the team CML/Associated driver's B7.1 by 2 laps, with a 96% consistency race.
Finishing with a 23 5:09.276.
Always room for improvement though, so I've fitted a set of new B7.1 front A arms (carbon). They're actually lighter, as well as stiffer.
Existing arms.
New arns! Savings of 4.2 grams. Every minimal gain helps - plus - slightly more responsive, stiffer arns.
Subtle difference was the distance between the inner hinge pin area required 1 x 1.5mm shim for each arm. This can be used to move the arm forward or rearwards depending on preference.
At the last race of the series, I am proud to say I was the highest placed B7 driver, beating the team CML/Associated driver's B7.1 by 2 laps, with a 96% consistency race.
Finishing with a 23 5:09.276.
Always room for improvement though, so I've fitted a set of new B7.1 front A arms (carbon). They're actually lighter, as well as stiffer.
Existing arms.
New arns! Savings of 4.2 grams. Every minimal gain helps - plus - slightly more responsive, stiffer arns.
Subtle difference was the distance between the inner hinge pin area required 1 x 1.5mm shim for each arm. This can be used to move the arm forward or rearwards depending on preference.
Nelson.81
Well-known member
- Messages
- 1,407
- Reaction score
- 1,990
- Points
- 333
I'm happy to report a 3rd place overall championship position with my Vision Racing B7. It has performed flawlessly.
View attachment 13371
At the last race of the series, I am proud to say I was the highest placed B7 driver, beating the team CML/Associated driver's B7.1 by 2 laps, with a 96% consistency race.
View attachment 13372
Finishing with a 23 5:09.276.
Always room for improvement though, so I've fitted a set of new B7.1 front A arms (carbon). They're actually lighter, as well as stiffer.
View attachment 13373
Existing arms.
View attachment 13374
New arns! Savings of 4.2 grams. Every minimal gain helps - plus - slightly more responsive, stiffer arns.
Subtle difference was the distance between the inner hinge pin area required 1 x 1.5mm shim for each arm. This can be used to move the arm forward or rearwards depending
Your obsessed with carbon parts for rc lol congrats on the