New Team Corally Models from the 2026 NRHSA Table Top Expo (Syncro4 RS, Furago6, Furago XS)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Forgive my lack of knowledge on said matter, but what's the difference between Rubycon electrolytic caps and Ymin solid caps .??
One better than the other.??
1st - Panasonic - Expensive
2nd - Rubycon - Quite Expensive
3rd - Ypin - Less Expensive

Use Panasonic if you can't afford failure.
 
So XC are going backwards and using cheaper components..??☹️
Cheaper capacitors are often found in mass production.

Medical equipment, high-end sound systems etc tend to have better capacitors.

8edcac38-2298-4f92-994d-3067d957eafe-1_all_11458.webp

Here's some I changed in a sound system.

8edcac38-2298-4f92-994d-3067d957eafe-1_all_11404.webp

Replaced the cheapy caps with Panasonic capacitors 5 years ago. My repair has lasted longer than the factory specced components. It failed after 3 years.

Still going strong now though.
 
So XC are going backwards and using cheaper components..??☹️
No the YMIN solid caps are more expensive than even tier 1 electrolytic caps not less expensive.

Seeing as nobody bothered I'll do it myself:

Here is the plain-text summary comparing YMIN solid/hybrid caps to Rubycon wet electrolytic caps in an R/C car ESC:

Rubycon (Wet Electrolytic)
  • Performance: Higher internal resistance (ESR), so it takes larger cans or higher capacitance values to filter fast PWM switching ripples effectively.
  • Durability: Forgiving and self-healing against minor voltage spikes; tends to bulge or vent gradually rather than shorting instantly.
  • Best For: Proven, reliable durability in rough, high-vibration bashing or setups prone to voltage spikes.

YMIN (Solid Polymer / Hybrid)
  • Performance: Ultra-low ESR and vastly superior high-frequency ripple suppression, meaning a physically smaller cap can outperform a much larger wet cap.
  • Durability: Pure solid caps cannot self-heal and risk shorting if pushed past their voltage rating, requiring plenty of voltage headroom (though YMIN hybrid versions add a small amount of liquid to regain some spike tolerance).
  • Best For: Tight spaces, high-frequency brushless ESC efficiency, and racing/speed builds where voltage ratings have safe headroom.
The YMIN caps Corally is using are just about the same size as the previous Rubycons so they should offer much better filtering. As long as they have used sufficiently high voltage caps the danger of voltage spike damage should also be negligible. To reiterate, these are not cheaper caps, they are more expensive caps with better performance.
 
Last edited:
Back
Top