New Cvd’s free fix from corally

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Nelson.81

Nelson.81

Well-known member
Messages
1,266
Reaction score
1,829
Points
333

IMG_8271.webp
 
i have put the black ones on and left everything on, the springs and even the short pin in there. it's not going anywhere so i don't see why we should remove them.
 
NBRC said:
i have put the black ones on and left everything on, the springs and even the short pin in there. it's not going anywhere so i don't see why we should remove them.
Click to expand...
Well if it ain't broke - don't fix it!

What I'm waiting for now are all the people wanting the 'free replacement under warranty' that have no proof of purchase or otherwise can't register their rigs......
 
My kagama 4 came with the cvds pre shrink wrapped, so I haven't had any issues. Having bought it used but new from eBay I've got no real proof of purchase anyway but I might try and blag a set of these.
 
Horatio said:
Well if it ain't broke - don't fix it!

What I'm waiting for now are all the people wanting the 'free replacement under warranty' that have no proof of purchase or otherwise can't register their rigs......
Click to expand...
I'll give it a go later and let you know how I get on 👍🏽
 
it's quite hards to prove you have a truck when you haven't registred is so .... we will see
 
NBRC said:
it's quite hards to prove you have a truck when you haven't registred is so .... we will see
Click to expand...
Someone commented online what if you have multiple vehicles & corally said register them all, so nothing ventured nothing gained. I registered something before can’t remember what for but only asked which hobby shop I purchased it at, didn’t ask for proof of receipt
 
Right, mine is registered, this is what I got when done. Guess I just wait for an email now.

1000019005.webp
 
Definitely TC to me has excellent customer service all I did was provide proof of purchase easy bought off eBay ( new discount ) before the tariffs then the Spark off of Amazon. I haven’t registered mine yet very good idea there. I already have my repair kit but till I have a issue with my fix I’ll save when it’s time to install new

image.webp
 
I sent a message to Corally, I did not register my Spark XB6 and I do not have a serial number, I did not keep the box. I do not know if I will be entitled to receive replacement parts.
 
FB11 said:
I sent a message to Corally, I did not register my Spark XB6 and I do not have a serial number, I did not keep the box. I do not know if I will be entitled to receive replacement parts.
Click to expand...
That's a shame, there's an irony that an RC car is probably one of the few high value items you can buy that doesn't actually have a serial number anywhere on it 🤷🏽‍♂️
 
AggyMi said:
C'est dommage, il y a une ironie dans le fait qu'une voiture RC soit probablement l'un des rares articles de grande valeur que vous pouvez acheter et qui n'a pas réellement de numéro de série dessus.🤷🏽‍♂️
Click to expand...
Il n'y a pas de numéro sur le châssis, mais il y en avait peut-être un sur la boîte. Sur la page d'enregistrement de Corally, il y a une ligne pour écrire un numéro, donc je ne peux pas accéder à la fin de l'enregistrement.
 
Sinon j'achèterai un jeu de CVD si ceux d'origine cassent.
 
FB11 said:
I sent a message to Corally, I did not register my Spark XB6 and I do not have a serial number, I did not keep the box. I do not know if I will be entitled to receive replacement parts.
Click to expand...
Did you buy online by chance? All I did was provide the purchase from eBay, I still have my box on both my TC’s most of my jet boxes also but there taking up a whole section in my barn
 
J'ai reçu une réponse de Corally, le Spark XB6 n'est pas affecté par ce problème CVD mais le kit de reconstruction est compatible. (y)
 
Could try straightening it in a vice or with hammer block wood plenty vids online or jennys rc or RCSpares probably pick 1 up cheap enough.
 
Back
Top