How are the Corally servo savers?

[HZRDOS]

How do they hold up? Do they need adjusting from stock....like too soft of a spring?

 

[jimbobjr]

How do they hold up? Do they need adjusting from stock....like too soft of a spring?

Mine in the xtr needed to be tighter. I just took the unit out and tightened it instead of buggering it up with pliers. Hasn’t moved so I guess it’s been good. Use some blue lock tite.

 

[RCproponent]

Mine in the xtr needed to be tighter. I just took the unit out and tightened it instead of buggering it up with pliers. Hasn’t moved so I guess it’s been good. Use some blue lock tite.

^ I did the same

 

[Exc3l]

I need to tighten my normal Outcast servo save. By how much should I?

 

[HZRDOS]

I need to tighten my normal Outcast servo save. By how much should I?

You know how to do the C-clips? If so, start with 2 of them and try it.

 

[Megafandrew]

I tightened mine up also and t was great no issues. I didn’t have great luck with the servo so I switched to power hd

 

[tom1208]

There’s a wee hole in the chassis under the servo saver. It’s there so You can put a wee screwdriver in there to hold the nut and turn the steering. This will tighten or loosen the nut for the tension.

 

[jimbobjr]

There’s a wee hole in the chassis under the servo saver. It’s there so You can put a wee screwdriver in there to hold the nut and turn the steering. This will tighten or loosen the nut for the tension.

Idk about you but when I do that I’m like “okay, yes, I think I’m making it tighter...no wait I think it’s getting looser....aaaaa....okay which way was I going....yes now it’s tighter, this is the way...whoops now it’s looser...”

 

[tom1208]

Lol, lefty loosy righty tighty, or is it the other way round