Esc problem

[bigtrev]

Cerix 2 160 runs fine with sensor wire out plug the sensor wire back in it works for a bit then stops green light still comes on if motor was running pull sensor wire out works again.
I’ve tried new sensor wire re bound handset reset esc

Any ideas

Thanks

 

[AggyMi]

Cerix 2 160 runs fine with sensor wire out plug the sensor wire back in it works for a bit then stops green light still comes on if motor was running pull sensor wire out works again.
I’ve tried new sensor wire re bound handset reset esc

Any ideas

Thanks

Have you got another motor you can try with that esc?

 

[bigtrev]

Have you got another motor you can try with that esc?

Motor is fine tried it on two more does the same works fine with sensor wire out then works a few mins when plugged in then have to unplug it again