Kagama ADU Racing battery \ ESC tray

[Trucking in space]

Just got it unboxed. It looks amazing. 7075 aluminum 4mm thick on the sides and 3mm thick on the ESC plate. 3mm thick carbon fiber.
3 beefy battery straps (3rd strap goes lengthwise)

It's $35, but it'll add rigidity to the chassis plate and it looks great. Pictures later when it's installed.

I don't wanna sound like a shill, but I'm impressed every time I order a new part from them, it's better than the pictures looked.

Happy holidays everyone.

 

[samo975]

Nice. Make sure you upload some pictures once you have it in your rig. What else have you bought from ADU?

 

[Nelson.81]

Just got it unboxed. It looks amazing. 7075 aluminum 4mm thick on the sides and 3mm thick on the ESC plate. 3mm thick carbon fiber.
3 beefy battery straps (3rd strap goes lengthwise)

It's $35, but it'll add rigidity to the chassis plate and it looks great. Pictures later when it's installed.

I don't wanna sound like a shill, but I'm impressed every time I order a new part from them, it's better than the pictures looked.

Happy holidays everyone.

View attachment 7495

View attachment 7496

View attachment 7497

View attachment 7498

Nice you have the newer version that’s taller

 

[Nelson.81]

The older version

 

[samo975]

The older versionView attachment 7500

Do I see method RC tires on there? . Maybe not. But just thought I would mention I have some Method RC belted tires that look very similar, and I am not sure quite yet, but I think they may be a little too much for my Kronos. I keep eating up the crown gear on my front differential (when braking). I am thinking they are just a little too heavy. But I am still testing that theory as I have another crown gear on the way and I reinstalled the original tires…time will tell

 

[Nelson.81]

Do I see method RC tires on there? . Maybe not. But just thought I would mention I have some Method RC belted tires that look very similar, and I am not sure quite yet, but I think they may be a little too much for my Kronos. I keep eating up the crown gear on my front differential (when braking). I am thinking they are just a little too heavy. But I am still testing that theory as I have another crown gear on the way and I reinstalled the original tires…time will tell

They are methods not run them yet so can’t comment but they come in pretty light for belted tire

 

[Horatio]

They are methods not run them yet so can’t comment but they come in pretty light for belted tire

View attachment 7512

View attachment 7513

They are light aren't they! Nice.

 

[Nelson.81]

They are light aren't they! Nice.

Very but the foams feel very soft/light if theres even any in there, vp pro feel better in that regards, but they look badass imo we’ll see how they run.

 

[AngrySection8]

Very but the foams feel very soft/light if theres even any in there, vp pro feel better in that regards, but they look badass imo we’ll see how they run.

I've had good luck with mine, ran the 3.8 variant on my kronos when it was 8s and I've got arrma mojave sized ones on my asuga running 8s, not gonna lie I've blown the belts on the fronts of both rigs but even after that they still run well, not out of balance and only balloon a little bit over stock, zero complaints from me.

 

[Nelson.81]

I've had good luck with mine, ran the 3.8 variant on my kronos when it was 8s and I've got arrma mojave sized ones on my asuga running 8s, not gonna lie I've blown the belts on the fronts of both rigs but even after that they still run well, not out of balance and only balloon a little bit over stock, zero complaints from me.

Yeah man sweet seen a few people run them & like them. What your 8s setup? I definitely gonna build something 8s next.

 

[AngrySection8]

Yeah man sweet seen a few people run them & like them. What your 8s setup? I definitely gonna build something 8s next.

Well the kronos is no more, it went back to stock and sold to a friend, but it went through a few variations, first was a max6 with a 4092 in 1300, then went mmx8s with a 4092 in 1500, then mmx8s with a hobbywing 4985/1650. The asuga was mmx8s with a 4292 in 1500 right out the box but just a week or 2 ago I changed it to the max6 g2 system but haven't ran it yet like this. I love the asuga on 8s, it's great, but honestly the kronos wasn't, it was a hoot don't get me wrong but almost undrivable, just wanted to backflip with the smallest amount of input and virtually any speed

 

[Trucking in space]

Nice. Make sure you upload some pictures once you have it in your rig. What else have you bought from ADU?

Front steering knuckles
Front and rear shocks towers
Ackerman\steering rack
Shock standoffs

 

[Trucking in space]

The older versionView attachment 7500

I like the red battery straps.They highlight the other red components. That's a clean build.

 

[Nelson.81]

I like the red battery straps.They highlight the other red components. That's a clean build.

Might have to change the long horizontal one, 2 joined together aren’t long enough to go under & over the tray & if attach them at the ends tray they too bit too long, I ordered the medium & long straps, neither fit great length wise. Need longer or shorter strap for better fit really but I’ll make them work

 

[Partydaz]

Finally got around to getting one and its a beautiful thing , little snug fit on the esc but the lipos have a little give so not too worried, got some 3m vhb tape so if I need move the esc along a bit I can .

If you keep cracking the stock one or your original is starting show signs of breaking get one of these and never worry about your lipo tray snapping again thing is built well beefy!

Little bit worried about how close the lipo is so might move the esc after all

 

[Atomic Skull]

The extra lengthwise strap is too high to fit under an Asuga body with 5000mah 6S batteries.

 

[mrBigpitts]

Finally got around to getting one and its a beautiful thing , little snug fit on the esc but the lipos have a little give so not too worried, got some 3m vhb tape so if I need move the esc along a bit I can .

If you keep cracking the stock one or your original is starting show signs of breaking get one of these and never worry about your lipo tray snapping again thing is built well beefy!

Little bit worried about how close the lipo is so might move the esc after all

View attachment 12093

View attachment 12094

View attachment 12095

Yes,that's a 10000mah 4s ovonic pack in an adu tray with the lengthwise strap in use,max 8 esc moved from stock position, perfect fit.