Muraco build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Sandracer_NL

Sandracer_NL

Well-known member
Messages
10
Reaction score
20
Location
The Netherlands
Corally RC's
  1. Muraco
So I got a Muraco this week and need to get it ready ASAP for Saterday’s Arrmaforum 😄 bash day!
Glued tires, taped wheel holes, reinforced the body, used the Dremel on the wheel nuts to serrate them (non-errated wheel nuts?! Come on TC! Booohhh👎). Made a foam patch for the center roll cage mount.
Next: skid plates, add motor fans, change battery straps (longer ones and a 3rd strap) and check the included V2 chassis brace.

IMG_3658.jpeg


IMG_3657.jpeg


IMG_3659.jpeg


IMG_3660.jpeg
 
Very nice!! Congrats! I really like the handling of the TC stuff, look forward to hearing how ya like it. Enjoy!!👍
 
I've ran the Muraco on two Arrmaforum bash days and Saturday will be the third.
I have to say I'm impressed. Handling is good. Speed and accelaration is pretty brutal out of the box and I had even set punch down one level! It did 87km/h on sand and I'm not sure if there was even a little more in it, as the 'runway' was somewhat limited by tracks made by 1:1 offroaders.
I have no doubts that on road and with some lighter lipo's (I run 2x3s 8000mah) it will be close to its' stock configuration claim of 105km/h.
1726044589340.png


Furthermore, as I was too eager to run it, so I did not do the usual 'pre-run' things as check shimming, diff and shock oil levels etc. I did not even change the servo! ;)
I did however, add motor fans as the motor does get warm pretty quickly, and add skid plates. And I'm running my own transmitter.

Overall a big(y) from me!
 
Last edited:
Back
Top