How does one make adjustments to the servo saver?

[JPWarrior_KRX]

Is the servo saver in the Skeeter adjustable?
I've never done this before on my 6s rigs. New to the Hobby...

 

[HZRDOS]

Is the servo saver in the Skeeter adjustable?
I've never done this before on my 6s rigs. New to the Hobby...

Yes. Should have a collar on the bottom that is threaded. Like a shock preload. Turn it to put pressure on the spring and make it tighter.

 

[JPWarrior_KRX]

Yes. Should have a collar on the bottom that is threaded. Like a shock preload. Turn it to put pressure on the spring and make it tighter.

Thanks for the guidance.

 

[RadioControlSoul]

Not sure about the sketer but other rigs I have, there is a hole in the chassis where u can put a pick or something small from underneath and actually hold the collar while turning the wheels by hand one direction letting off and turn the wheels again repeat

 

[BashingBrian]

Not sure about the sketer but other rigs I have, there is a hole in the chassis where u can put a pick or something small from underneath and actually hold the collar while turning the wheels by hand one direction letting off and turn the wheels again repeat

I'm sure there is a hole in the chassis as I've heard someone mention it

 

[JMS RC]

small hole in the chassi right next to the collar, use like a 1.5 mm hex driver fro underneath press against the collar sides
and turn the wheel

 

[RCproponent]

Easiest to take the servo module out to get a good grip..

 

[slick2500]

small hole in the chassi right next to the collar, use like a 1.5 mm hex driver fro underneath press against the collar sides
and turn the wheel

Easiest to take the servo module out to get a good grip..

I've always done the above on my Arrmas to adjust the servo saver, I've never taken it out to adjust it.

 

[JvG]

Not sure about the sketer but other rigs I have, there is a hole in the chassis where u can put a pick or something small from underneath and actually hold the collar while turning the wheels by hand one direction letting off and turn the wheels again repeat

I just did that with my Radix and it works very easy. No need to take the whole thing apart.

 

[Mazin]

So let me be clear.....Standing over it and shouting does nothing!?

 

[JvG]

So let me be clear.....Standing over it and shouting does nothing!?

Well, it does nothing with my kids

 

[Mazin]

Well, it does nothing with my kids

They have the same mentality as my cat and jack Russel I see.

 

[JPWarrior_KRX]

They have the same mentality as my cat and jack Russel I see.

You coulda stopped at cat. They'd rather cut your throat open than listen to you.