Corally jambo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

markrolls88

New member
Messages
2
Reaction score
1
Hi I have a corally jambo I run it on 6s and because of that I have replaced all the out drives to spring steel and bought all new drive shafts since this upgrade when i accelerate it makes a clicking noise any ideas what this could be I have taken out the centre diff and checked that and the spacing off the pinion to spur is fine I'm stumped 🤷‍♂️
 
Clicking on acceleration often points to the rear diff area, so check the rear diff, input gear and crown gear for wear and mesh.
Since you've stripped the diff and rebuilt with the spring steel outdrives, are the shims in the right places, and is everything seated correctly in the diff?
Bearing failure can also happen, so check the two in the input shaft as well.
 
Back
Top